North Suburban Home Maintenance
THE ROCK SOLID CHOICE IN GARAGE FLOORING CONTRACTORS
GARAGE FLOOR AND CONCRETE COATING PROFESSIONALS
Serving Lake County, Illinois and surrounding communities
LAKE COUNTY ILLINOIS GARAGE FLOOR COATINGS - RESIDENTIAL & COMMERCIAL WORK
When it comes to garage floor coatings we’ve got your floor covered! We utilize only the best formulations of polyurea floor coatings to make your floor look great and last!
GARAGE FLOOR AND CONCRETE COATINGS
When installing a residential garage floor in our Midwest climate there are a lot of things that we need to consider when choosing a floor coating. Polyurea excels in combating the following conditions.
Road Salt/ Chemicals
Ice and Snow
POLYUREA: THE CLEAR ROCK SOLID CHOICE
TO OUTLAST THE EFFECTS OF MOTHER NATURE
We choose to use Polyureas throughout our whole floor coating system. Polyureas give you all of the needed characteristics to withstand our climate and much more!
Pure Polyurea Base Coat
Polyaspartic Polyurea Top Coat
Polyureas are extremely flexible, in fact are 98% more flexible than typical Epoxy/Hybrid floor coatings. This flexibility is key during the summer to winter transition when the ground and concrete are freezing. During this time, the concrete is shifting and expanding which causes most floor coatings to fracture and crack. Polyureas, being as flexible as they are, expand and contract with the concrete leaving the surface strong and intact. Polyureas are also fully cured after 24 hrs. This does not allow the product to get harder or softer over time and with different temperatures. Epoxy/Hybrid floor coatings cure to 80% in 7 days and over the course of time cure the additional 20%. During this time the product continues to get harder and more brittle causing epoxies to eventually fracture and crack causing delamination.
Polyureas are 4 X more abrasion resistant than epoxy/hybrid floor coatings. This is due to their extreme flexibility, elongation, dense cross-linking, and mar resistance. Polyureas can take a tremendous amount of abuse because they are malleable and can take the physical impacts and disperse them, much like the rubber on a car tire.
As well as being flexible and abrasion resistant, polyureas are more chemically resistant to a much wider range of chemicals than epoxy surfaces. This is due to their densely cross-linked chemistry. From Salt, Oil, Gas, and Grease, to Acids, Skydrol, and Hydroxides Polyureas will withstand a wide range of chemicals including salt, oil, gas, and grease.
Polyureas have 2 X the adhesion over typical epoxy/hybrid floor coatings. Polyureas are commonly associated with spray on liners in pickup trucks. Polyureas are made from the same materials only reformulated for concrete. In a spray application, the product is cured within 17 seconds and has an eternal bond to the substrate. This same chemistry is used in our floor coating product but slowed down to an hour cure time. This gives the product time to penetrate into the concrete deeply and bond molecularly into the concrete.
Polyureas are 100% UV stable. UV stability is very important if you want your finish to look great and last! You will never see a difference in color with areas that are exposed to UV rays. These areas could include windows, doors, garage doors, and the portion of the floor that sticks beyond the garage door and is exposed to light every day! The UV stability of our product is backed by a written lifetime warranty!
LAKE COUNTY ILLINOIS GARAGE FLOOR & COMMERCIAL FLOOR PREPARATION
To give us the best adhesion possible, we utilize diamond grinding equipment to create an extremely profiled and porous surface and to remove any weak or deteriorated concrete.
WHAT IS DIAMOND GRINDING?
This is the mechanical process utilizing grinding wheels embedded with diamonds to remove the latent layer, deterioration, contamination, loose concrete that will prevent a solid bond of polyurea.
WHAT DOES DIAMOND GRINDING DO TO A CONCRETE FLOOR?
By diamond grinding the concrete we can remove any deteriorations, contaminants, and the latent layer of concrete while making the surface extremely course and porous. The diamonds will also leave micro "grooves" in the concrete allowing a greater profile and better bite for the polyurea base coat.
Commonly caused by salt and chemical damage, these deteriorations are the areas known as spalls. When salt and moisture are present on your concrete, the slab naturally absorbs them and reacts causing an ion exchange. As this happens, the electrons in the concrete are changed into a water soluble carbonate. Now, as the moisture becomes present on the surface of the concrete, the carbonates begin to dissolve. This causes pitting and spalling to occur on your concrete slab.
Contaminations are oils, grease, gas, or anything that has penetrated into the surface of the concrete. By removing the latent layer of concrete, these areas are removed and treated. This leaves the surface clean and ready to coat. In areas that oil has penetrated deep into the concrete, we will use a degreaser to lift excess oil from the surface. As another precaution, our product has been formulated with an oil base. This eliminates the chance of inner coat adhesion failures by fusing with the oil that may be already present
This is the layer of concrete that forms on the surface of a curing slab. As the concrete is curing, the moisture that is present in the mix is driven upward as it evaporates. This causes the concrete to develop a “cream” or latent layer. This surface is about 1/16th of an inch thick, has minimal pores, and is the weakest layer of the concrete. By removing this layer, we are creating an extremely coarse and porous surface as well breaking into the sound structure of the slab.
WHY DO WE RECOMMEND A FULL CHIP FLOOR LAKE COUNTY ILLINOIS GARAGE FLOOR?
Full chip broadcast is chip thrown on to the floor completely covering the basecoat and leaving the surface even and uniform in color.
Skid Resistance: Full chip floors are extremely skid resistant even when the surface is wet. This is an important factor in the winter time when you are bringing in snow, slush and water which would leave a normal garage floor wet and slippery. The surface has good texture to eliminate a wet slippery floor and lets you safely walk across your garage!
Low Maintenance: Although chip floors are extremely skid resistant, they are extremely easy to clean and keep clean. While the different colors of chips create a tone that dirt and mud blend into, it also offers an easy to clean texture. Polyaspartic polyureas cure out monolithic, leaving the surface non-porous. Dirt, oils, gas, and other contaminants cannot permeate the surface which makes them easy to sweep and wash away.
Solid Color/Partial Chip Floors: While they can be easy to clean because of their very smooth surface, they become extremely slippery when wet. This will result in many unwanted injuries. The only way to make these surfaces skid resistant are by broadcasting in silica sand which will make the surface coarse. This coarse surface now becomes very hard to keep clean and maintain. This is why we recommend a full chip floor which is the best of both worlds!
ONE DAY LAKE COUNTY ILLINOIS GARAGE FLOOR COATINGS
Be walking on your floor in 4-6 hours and parking in 24 hours after we complete the installation of your new garage floor! All garage floors up to 2000 sq ft completed in a one day application!
ITS TIME TO MAKE YOUR FLOOR THE TALK OF THE TOWN!
Call now 847-615-2007 to start enjoying your garage again.
North Chicago Fire Department. Remove failing epoxy and install polyurea industrial coating.